Chat Now
Position:Home - Product - >>channel strut>>channel strut

Image Model Description
Back to Back Combination Channel BACK TO BACK COMBINATION CHANNEL   Back to Back Combination Channel  Material Specification:   Length: 6 metres Most channel combination can also be manufactured from other strut profiles.  To order simply change the digits to represent the strut profile.     Combination channel sections are manufactured against firm orders only.   Product Details   AIFAN Combination Channel/Strut section is manufactured from strip steel to the  following AS standards:   Mild Steel & Hot Dip Galvanised to AS/NZS1365, AS1594, AS/NZS4680, ISO1461 Stainless Steel to AS1449, AS2837   Welding Details The channel is continuously spot welded at a maximum of 150 centres
C-Channel End CapC-CHANNEL END CAP   C-Channel End Cap Product Details   AIFAN provides a range of plastic accessories to complement 41mm wide channel sections.   Channel can be transformed into cable conduits using the channel cover strip and  range of end caps(covers).   Suits 41x41mm channel.
Concrete Insert Channel CONCRETE INSERT CHANNEL Concrete Insert Channel    Material Specification   Length: 6m Thickness: 2.5mm Profile: 41x41mm Channel Lugs are punched continuously along the channel length at 200mm centres.   Product Details   AIFAN Concrete Insert Channel/Strut section is manufactured from strip steel to  the following AS standards:   AS/NZS1365, AS1594, Galvanised to AS/NZS4680, ISO1461   Loading Details   Testing on 200mm section confirm a maximum pullout of 1030 kilograms with a safety factor of 3.   Notes   Testing was carried out in controlled laboratory conditions  using a concrete strength of 25 Mpa (average).   The Rated load performance will change when using other concrete strengths and  depending on the concrete reinforcing mesh.
RetainerRETAINER Retainer   Product Details   AIFAN provides a range of plastic accessories to complement 41mm wide channel sections.   Channel can be transformed into cable conduits using the channel cover strip and  range of end caps.    Retainer is suitable for use in all 41mm channel sections for the support of cables  prior to cover strip installation.
Ribbed Back to Back Combination ChannelRIBBED BACK TO BACK COMBINATION CHANNEL Ribbed Back to Back Combination Channel   Material Specification   Length: 6 metres Most channel combination can also be manufactured from other strut profiles. To order simply change the digits to represent the strut profile.   Combination channel sections are manufactured against firm orders only.   Product Details   AIFAN Ribbed Combination Channel/Strut section is manufactured from strip steel to  the following AS standards:   Mild Steel & Hot Dip Galvanised to AS/NZS1365, AS1594, AS/NZS4680, ISO1461 Pre-Galvanised to AS1397   Welding Details The channel is continuously spot welded at a maximum of 150 centres
Top page Prev Page  Next Page End Page Total:10 Page:1/2Page
Wire Mesh Cable Tray    CABLE TRAY    CABLE LADDER    CABLE SUPPORT    CABLE DUCT    CABLE TRUNKING   
Right Reserved © 2013 Shanghai Aifan Metal Co.,Ltd HU ICP11010236-1